Joining

Other Language:

Newsletter

Subscribe to our mailing list

* indicates required

Staking

Techniques

Staking generally develops high strength attachments with good long-term retention. The operation is typically performed on tubular sections. A tool is pressed into the inside of the tube, forcing the walls to expand outward, then curl down as the tool advances. The tool stroke is terminated when the outer edge of the tube contacts the part that is being attached. The use of a lubricant is recommended to prevent galling.

The operation is usually performed by a single, rapid stroke of a press. The loads imposed in the operation usually require that the components have a surface to receive backup tooling, and all features of the casting from the point of impact to the areas of reaction must have sufficient strength to withstand the applied loads.

Controlled tests performed indicated that satisfactory attachments can be formed on alloys ZP3, ZP5 and ZP8 with no heating of the tool or casting.

Wire Staking

ima01

Click here to open the DWF version      Click here to open the DWF version      Click here to open the DWF version

Double Staking

ima02
Click here to open the DWF version      Click here to open the DWF version

Staking by Ring Punching

ima03

Click here to open the DWF version      Click here to open the DWF version

Click here to open the DWF version      Click here to open the DWF version